RMS Power: 400w
Peak Power: 1200w
Impedance: 4 Ohms
Dimensions: H360 x W400 x D400
VIBE N-wedge 2 enclosure design eliminates the negative
effects which enclosures can have on subwoofer performance.
Heavy duty carpet with VIBE stitching combined with VIBE trademark Rubber
Crackle adds a durable but classy look to the enclosure.
Sealed enclosure for excellent transient response and extremely tight,
punchy, fast bass.
VIBE TP2 spring loaded terminal posts for easy and secure connection of
the speaker cable.
18mm MDF construction, glued, screwed and braced for absolute rigidity.
The extra rigid design improves sound by eliminating the power lost by
enclosure vibration.
£55.00
VIBE
SLICK A2 2/1 channel amplifier
Super Slick design with rubberised finish
Twin end caps for stealth connections
Soft turn on feature
Optional bass boost remote control
18db bass boost
2 ohm stable
Selectable HP/LP/Flat crossovers
High quality surface mounted components
Double sided PCB
Preouts for linking additional amplifiers
Lo-level and Hi-level inputs
Built in relay protection
Power @ 4 ohms 2 x 100 WRMS
Power @ 2 Ohms 2 x 160 WRMS
Power Bridged 1 x 325 WRMS
Max Power: 650W
Minimum speaker impedance 2 ohm
THD Distortion 0.1 %
IMD Distortion 0.1 %
Input Sensitivity 200 mv - 6V
Input Impedance 15 K
Signal to Noise Ratio 98 dB
Crossover range: 55 - 5500Hz
Bass Boost 0 dB -+24 dB
Size H 65mm x W 375mm x D 245mm
£55.00
EDGE
12" Active Bass reflex subwoofer (ED512A) enclosure with
built-in amplifier
ED5 Active series subwoofer loaded
MDF construction
3” flared port delivers outstanding bass response
Integrated active amplifier (ED72100)
Secret channel to hide amplifier cables
RMS Power: 300 Watts
Max Power: 900 Watts
Dimensions: 408mm (W) x 338mm (H) x 413mm (D)
£60.00
EDGE 12" Passive Sub Box
Able to deliver a punch like a true heavyweight champion the Edge subwoofer enclosures will be sure to take top prize. The lighweight, yet extremely tough electroplated woofer has been placed in a perfectly matched enclosure to maximise the results. The heavyweight box features a 4" tuned port allowing it to drop deeper and punch harder than anything else around.
Speaker size: 12"
RMS power: 300 watts
Peak power: 900 watts
£45.00
VIBE
SLICK A3 4-channel Amplifier (bridgeable into 2 or 3 channel
mode)
RMS output @ 4ohm: 4 x 100W
RMS output @ 2ohm: 4 x 160W
RMS 2 channel bridged @ 4-ohm: 2 x 325W
RMS 3 channel @ 4ohm: 2 x 100W + 325W for BASS
Signal to Noise Ratio: 98dB
Dimensions: H 65 x W 475 x D 245
Frequency Response: 20Hz - 20kHz
Crossover type: LP / HP / Flat
Crossover range: 55 - 5500Hz
New rubberised paint finish adds a touch of quality and originality.
Cast alloy end caps add to the amplifiers sleek looks whilst at the same
time hiding the wiring and connections.
Quality components and a 2 layer circuit board with discrete surface mount
components.
Built in protection circuitry safeguards the amplifier under extreme power
output and ensures that the connected speakers are always playing under
optimum conditions.
ensures that your speakers receive only the frequencies they were designed
to handle.
0 – 18dB bass boost @ 45Hz.
£85.00
